- Home
- »
- Products & Services
- »
- New Items
New Items
BETAFINE XL ABSOLUTE RATED PLEATED POLYPROPYLENE FILTER CARTRIDGE
Material | Polypropylene(PP) |
Filter Medium Material | Fiberglass |
Diameter | Pleated Polypropylene |
Usage/Application | Water Filter |
Pore Size | Any Micron till 70 MIcron |
Length | 10-15 inch |
Maximum Service Temperature | 80 Deg C |
Valve Size | 1/2 |
Country of Origin | Made in India |
Area of Application: | - Coatings - Electronics - Food & Beverage - Pharmaceutical - Industrial - Chemical & Petrochemical |
Filter Media: Pleated Polypropylene
Support Layers: Polypropylene
Center Core: Polypropylene
End Caps: Polypropylene
Gasket & O-Rings: EPR, Silicone, Fluorocarbon,
PTFE Encapsulated O-Ring, Polyethylene, Nitrile
Micron Rating: 0.2, 0.5, 1.0, 2.5, 5, 10, 20,
40 & 70 Micron
Dimensions:
OD 2.62”
Length 9.75”, 10”, 19.5”, 20”, 29.25”, 30”
39” & 40”
Max Temperature: 175℉ (80℃)
Max Differential
Pressure: Forward
60 PSID@77℉ (4.0 bar @25℃)
Reverse40 PSID@77℉ (2.6 bar @25℃)
Recommended Change-out Differential Pressure: -
Area of Application:
• Coatings
• Electronics
• Food & Beverage
• Pharmaceutical
• Industrial
• Chemical & Petrochemical
IFYT SERIES LIQUID FILTER HOUSING
Product Brochure
Length | 40 Inch |
Diameter | 2.5 Inch |
Type Of Housing | Cartridge Housing |
Gaskets / O Rings | PTFE |
Maximum Operating Temperature | 90 Deg. C |
Country of Origin | Made in India |
Design Pressure: | 0.6/0.8/1.0 Mpa, can be customized according to special requirements |
Seal Type: | O-Ring or Flat Gasket |
Design Temperature | 41 F - 212 F (5 Deg C - 100 Deg C ) over 60 Deg C need to inform |
Housing: - SS304, SS316L, Carbon steel
lined rubber
Seal Type: O-Ring or Flat Gasket
Design Temperature: 41℉ - 212℉ (5 ℃-100℃) over 60℃
need to inform
Design Pressure: 0.6/0.8/1.0 Mpa, can be customized
according to special requirements
Length: 10”, 20”, 30” & 40”
ZETA PLUS SANITARY HOUSING
Product Brochure
Material of Filter Base & Dome: | SS316L |
External Dome Clamp: | SS304 |
Vent & Drain Valve: | SS316 |
Construction | Polished 316 stainless steel |
Maximum Operating Pressure: | 125PSI at 90 Deg C |
Base & Dome: SS316L External Dome Clamp: SS304 Vent & Drain Valve: SS316
Construction - Polished 316 stainless steel
Design 0-ring seal, centerpost construction for easy cartridge removal
Quick-release V-band clamp closure for quick
and easy cartridge changeout.
Maximum Operating
Pressure: 125PSI @194℉ (90℃)
BETAFINE D CAPSULES DISPOSABLE FILTER CAPSULES
Filter Medium Material | Polypropylene |
Material | Polypropylene (PP) |
Usage/Application | Industrial |
Length | 5-10 inch |
Diameter | 2-3 inch |
Operating Temperature | 40 Deg . C |
Filter Membrane | Polypropylene |
Country of Origin | Made in India |
Max Operating Pressure: | 75 PSID |
Area of Application: | - Coatings - Fine Chemicals - Pharmaceutical - Microelectronics Market |
Filter Media: Polypropylene
Support Layers: -Center Core: -
End Caps: -Flat Gasket: -
O-Ring: Silicone, Fluorocarbon & EPR
Micron Rating: 0.2, 0.5, 1.0, 2.5, 5, 10, 20,
40 & 70 Micron
Dimensions:
OD 3”
Length 2 ½ “ & 5”
Max Temperature: 104℉ (40℃)
Max Differential
Pressure: Forward
60 PSID@104℉ (4.1 bars @40℃)
Change-Out35 PSID@104℉ (2.4 bars @40℃)
Max
Operating Pressure: 75 PSID
Area of Application:
• Coatings
• Fine Chemicals
• Pharmaceutical
• Microelectronics Market
BIOLIFE FILTERS CARTRIDGES & CAPSULES
Length | 40 Inch |
Diameter | 2.5 Inch |
Applications | Chemical Process, Cosmetics, Beverages/Alcohol, Water Treatment, Pharmaceutical / Biological |
Country of Origin | Made in India |
Vent O-Rings: | Silicone, Fluorocarbon, EPR |
Max Differential Pressure: | 65 PSID at 104 F |
Area of Application: | - Cell culture media - Concentrated protein solutions - Cell culture biomass - Biological fluids - B |
CARTRIDGE & Small/ Large Capsules
Filter Media: Glass Microfiber Support Layers: Polypropylene Center Core: Polypropylene
End Caps: Polypropylene
Adapter SupportRing: Polysulfone
O-Rings: Silicone, Fluorocarbon, EPR
Micron Rating: PGE050 Micron
Dimensions:
OD -
Length 5”, 10”, 20”, 30” & 40”
Max Temperature: 176℉ (80℃)
Max Differential
Pressure: Forward
80 PSID@77℉ (5.5 bar @25℃)
25 PSID@175℉ (1.7 bar @80℃)
Reverse50 PSID@77℉ (3.4 bar @25℃)
Recommended Change-out Differential Pressure: -
Area of Application:
• Cell culture media
• Concentrated protein solutions
• Cell culture biomass
• Biological fluids
• Blood Products
• Vaccine processing
• Membrane Prefiltration
CG55 SERIES LIQUID/GAS COALESCERS
Filter Media: | Glass Fiber |
Non Media : | Tinned Steel |
Micron Rating: | 0.1 & 0.3 Micron |
Max Temperature: | 200F (93.3 C) |
Max Recommended Differential Pressure: | 15 PSID |
Area of Application: | - Amine plant feed gas and treated gas - Suction and discharge of compressors - Fuel Gas purificatio |
Common Liquid Contaminants: | - Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion |
Filter Media: Glass Fiber
Non Media : Tinned Steel
Micron Rating: 0.1 & 0.3 Micron
Dimensions:OD 5.50”
ID -
Length 36”
Cylindrical Shape
Max Recommended Flow Rate: -
Max Temperature: 200℉ (93.3℃)
Max Recommended Differential Pressure: 15 PSID
Area of Application:
• Amine plant feed gas and treated gas
• Suction and discharge of compressors
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, activated carbon beds, flare systems, glycol units and metering systems
• Turbine feed gas
Common Liquid Contaminants:• Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion fluids, brine, and other liquid phase contaminates
CG60 SERIES LIQUID/GAS COALESCERS
Filter Media: | Glass Fiber |
Non Media : | Stainless Steel |
Micron Rating: | 0.1 & 0.3 Micron |
Max Temperature: | 200 F (93.3 C) |
Max Recommended Differential Pressure: | 15 PSID |
Area of Application: | - Amine plant feed gas and treated gas - Suction and discharge of compressors - Fuel Gas purificatio |
Common Liquid Contaminants: | - Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion |
Filter Media: Glass Fiber
Non Media : Stainless Steel
Micron Rating: 0.1 & 0.3 Micron
Dimensions:OD 6.0”
ID 4.0”
Length 40”
Max Recommended Flow Rate: -
Max Temperature: 200℉ (93.3℃)
Max Recommended Differential Pressure: 15 PSID
Area of Application:
• Amine plant feed gas and treated gas
• Suction and discharge of compressors
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, activated carbon beds, flare systems, glycol units and metering systems
• Turbine feed gas
Common Liquid Contaminants:• Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion fluids, brine, and other liquid phase contaminates
CG28 SERIES LIQUID/GAS COALESCERS
Filter Media: | Glass Fiber |
Non Media : | Tinned Steel |
Micron Rating: | 0.1 & 0.3 Micron |
Max Temperature: | 200 F |
Max Recommended Differential Pressure: | 15 PSID |
Area of Application: | - Amine plant feed gas and treated gas - Suction and discharge of compressors - Fuel Gas purificatio |
Common Liquid Contaminats: | - Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion |
Non Media : Tinned Steel
Micron Rating: 0.1 & 0.3 Micron
Dimensions:
OD 2.75”
ID 1.5”
Length 30”
Max Temperature: 200℉ (93.3℃)
Max Recommended Differential Pressure: 15 PSID
Area of Application:
• Amine plant feed gas and treated gas
• Suction and discharge of compressors
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, activated carbon beds, flare systems, glycol units and metering systems
• Turbine feed gas
Common Liquid Contaminats:
• Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion fluids, brine, and other liquid phase contaminates
CG40 SERIES LIQUID/GAS COALESCERS
Filter Media: | Glass Fiber |
Non Media : | Tinned Steel, Stainless Steel |
Micron Rating: | 0.1 & 0.3 Micron |
Max Temperature: | 200 F (93.3 C ) |
Max Recommended Differential Pressure: | 15 PSID |
Area of Application: | - Amine plant feed gas and treated gas - Suction and discharge of compressors - Fuel Gas purificatio |
Common Liquid Contaminants: | - Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion |
Filter Media: Glass Fiber
Non Media : Tinned Steel, Stainless Steel
Micron Rating: 0.1 & 0.3 Micron
Dimensions:OD 4.50”
ID 3.25”
Length 36”
Max Recommended Flow Rate: -
Max Temperature: 200℉ (93.3℃)
Max Recommended Differential Pressure: 15 PSID
Area of Application:
• Amine plant feed gas and treated gas
• Suction and discharge of compressors
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, activated carbon beds, flare systems, glycol units and metering systems
• Turbine feed gas
Common Liquid Contaminants:• Compressor lubrication oils, water, hydrocarbon condensates, amines, glycols, solvents, completion fluids, brine, and other liquid phase contaminates
PREMIUM DEEP PLEAT 740 STYLE FILTERS
Filter Type | Cellulose, Polypropylene |
Usage/Application | Water & Wastewater, Process Fluids, Acids, Bases, Amines, Glycols, Hydrocarbons, Brines, Organic Sol |
Diameter | 6" |
Filter Medium Material | Fiberglass |
Length | 40" & 30" |
Micron Ratings | 5, 10, 20, 30, 40, 70,100 & 135 Micron |
Flow Rate | 40 GPM Per Standard 40" Filter |
Filtration Grade | A |
Center Core: Polypropylene, Tinned Steel,
Stainless Steel
Netting: Polypropylene, Nylon
End Caps: Polypropylene, Tinned Steel, Stainless Steel
Micron Rating: 5, 10, 20, 30, 40, 70,100 & 135 Micron
Dimensions:
OD 6.25”
ID 1.55”
Length 40” & 30”
Max Recommended
Flow Rate: 40 GPM Per Standard 40” Filter
Max Temperature: 185℉ (85℃)
Max Recommended Differential Pressure: 50 PSID
Area of Application: Water & Wastewater, Process Fluids,
Acids, Bases, Amines, Glycols, Hydrocarbons, Brines,
Organic Solvents, Fuels & Coolants
DPU 600 HIGH-FLOW SERIES FILTER
Usage/Application | Water & Wastewater, Process Fluids, Acids, Bases, Hydrocarbons, Brines, Fuels, Organic Solvents, NG |
Filter Media: | Cellulose, Polypropylene, Micro-Fiberglass, Nylon & Polyester |
Center Core: | Polypropylene or Nylon |
Netting: | Polypropylene Nylon, Tinned Steel or Stainless Steel Can Body |
End Caps: | Polypropylene, Acetal, Nylon, Tinned Steel, Stainless Steel |
Micron Rating: | 0.5, 2, 5, 10, 20, 40, 70, 100 & 135 Micron |
Max Recommended Flow Rate: | 500 GPM per standard 60" filter |
Max Temperature: | 185 F |
Max Recommended Differential Pressure: | 35 PSID |
Micro-Fiberglass, Nylon & Polyester
Center Core: Polypropylene or Nylon
Netting: Polypropylene Nylon, Tinned Steel or Stainless Steel Can Body
End Caps: Polypropylene, Acetal, Nylon, Tinned Steel, Stainless Steel
Micron Rating: 0.5, 2, 5, 10, 20, 40, 70,
100 & 135 Micron
Dimensions:
OD 6.0”
ID 3.0”
Length 20”, 40” & 60”
Max Recommended
Flow Rate: 500 GPM per standard 60” filter
Max Temperature: 185℉ (85℃)
Max Recommended
Differential Pressure: 35 PSID
Area of Application: Water & Wastewater,
Process Fluids, Acids, Bases, Hydrocarbons, Brines, Fuels, Organic Solvents, NGLs, LPG, & Gas Streams
GP40 SERIES GAS PARTICULATE FILTER
Filter Media: | Polyester, Micro-fiberglass or Nylon |
Center Core: | Tinned Steel |
Outer Sleeve: | Tinned Steel |
End Caps: | Tinned Steel |
Micron Rating: | 0.5, 1, 5, 10, 20 & 50 Micron |
Max Recommended Differential Pressure: | 50 PSID |
Area of Application: | - Amine plant feed gas and treated gas - Suction and discharge of compressors - Fuel Gas purificatio |
Common Contaminants: | - Iron sulfides, iron oxides, corrosion products, pipe scale, sand, silt, desiccant fines |
Filter Media: Polyester, Micro-fiberglass
or Nylon
Center Core: Tinned Steel
Outer Sleeve: Tinned Steel
End Caps: Tinned Steel
Micron Rating: 0.5, 1, 5, 10, 20 & 50 Micron
Dimensions:OD 4.50”
ID 3.25”
Length 36”
Max Recommended Flow Rate: -
Max Temperature: 275℉ (135℃)
Max Recommended Differential Pressure: 50 PSID
Area of Application:
• Amine plant feed gas and treated gas
• Suction and discharge of compressors
• Fuel Gas purification
• Protection of molecular sieve beds, alumina beds, activated carbon beds, flare systems, city gates and metering systems
• Turbine & Reciprocating Engine Fuel Gas
Common Contaminants:• Iron sulfides, iron oxides, corrosion products,
pipe scale, sand, silt, desiccant fines
OHF 700 SERIES FILTER
Filter Media: | Cellulose, Polypropylene, Micro-Fiberglass, Nylon & Polyester |
Center Core: | Polypropylene, Polyester, Tinned Steel, Stainless Steel |
Netting: | Polypropylene or Nylon |
End Caps: | Nylon 6,6 |
Micron Rating: | 0.5, 2, 5, 10, 20, 40, 70, 100 & 135 Micron |
Max Recommended Flow Rate: | 350 GPM per standard 40" filter , 500 GPM per standard 60" filter |
Max Temperature: | 185 F |
Max Recommended Differential Pressure: | 35 PSID |
Micro-Fiberglass, Nylon & Polyester
Center Core: Polypropylene, Polyester, Tinned Steel, Stainless Steel
Netting: Polypropylene or Nylon
End Caps: Nylon 6,6
Micron Rating: 0.5, 2, 5, 10, 20, 40, 70,
100 & 135 Micron
Dimensions:
OD 6.5”
ID 3.0”
Length 40” & 60”
Max Recommended
Flow Rate: 350 GPM per standard 40” filter 500 GPM per standard 60” filter
Max Temperature: 185℉ (85℃)
Max Recommended
Differential Pressure: 35 PSID
Area of Application: Water & Wastewater,
Process Fluids, Acids, Bases, Hydrocarbons, Brines, Fuels, Organic Solvents, NGLs & LPG
HIGH PURITY FOOD & BEVERAGE GRADE PES CARTRIDGE
Size/Diameter | 2 inch |
Type | Food Grade Hose |
Length | 70 mtr |
Material | PU |
Country of Origin | Made in India |
Filter Media: | Polyethersulfone |
Area of Application: | - Wine - Beer - Juices - Soft Drinks - Bottled Water |
Filter Media: Polyethersulfone Support Media: Polypropylene End Caps: Polypropylene
Center Core: Polypropylene
Outer SupportCage: Polypropylene
O-Rings/ Gaskets Buna, EPDM, Silicone, Viton®,
Teflon®, Encapsulated Viton®
Micron Rating: 0.04, 0.1, 0.2, 0.45, 0.65 & 0.8 Micron
Dimensions:
OD 2.70”
Length 10”, 20”, 30” & 40”
Max Recommended Flow Rate: -
Max Temperature: 176℉ (80℃)
Max Recommended
Differential Pressure
Forward: 50 PSI (3.4 bar) at 20˚C
Reverse: 40 PSI (2.7 bar) at 20˚C
Area of Application:
• Wine
• Beer
• Juices
• Soft Drinks
• Bottled Water